It’ll cost anywhere from $200 to $6,000 to hire a painter. Expect small jobs, like kitchen cabinets or trim, to run $200 to $2,000. Larger projects, like your home’s exterior, range from $1,000 to $6,000. To estimate your needs, figure paying $2 to $6 per square foot or $20 to $50 per hour. Actual costs vary considerably depending on coverage area, type of work and regional cost of living differences. House Painting Arvada
Before the scrubdown, protect nearby plants by misting their leaves and saturating the surrounding soil with water, pulling them away from the house, and shrouding them in fabric drop cloths. (Plants will cook under plastic.) Lay more drop cloths along the base of the walls to collect any falling paint debris. Walls should be wet down before getting scrubbed, then washed with a gallon of water mixed with 1 cup chlorine bleach and 1 cup of either a concentrated, phosphate-free cleaner, such as a trisodium phosphate (TSP) substitute, or Jomax House Cleaner. Working in sections, from the bottom to the top, will avoid streaks. Be sure to rinse walls well before the solution dries. Wood siding and trim should be ready to paint after a day or two of dry weather. Arvada House Painters CO
The BEHR PREMIUM PLUS 2 gal. Flat Interior The BEHR PREMIUM PLUS 2 gal. Flat Interior Ceiling Paint is designed for use on textured popcorn and acoustic-style ceilings. This splatter-resistant paint offers great hiding performance for coverage of up to 800 sq. ft. Its mildew-resistant finish helps ensure that the matte sheen lasts over time. More + Product Details Close Arvada House Painters CO
If you have two weeks, a ladder and some experience, this makes an excellent DIY project. On most surfaces, it is forgiving of mistakes and easy to work with. Correcting mistakes only adds more time and not much more expense. However, a professional will get it done faster and with a better finish. If you don’t have 2 to 3 weeks to spare, find a professional painter near you today.
If there is any peeling — and there usually is somewhere — it's essential to scrape off any loose paint. This doesn't just mean the parts that are already separated from the wood and ready to fall off on their own. Each spot where paint has peeled loose needs to be scraped thoroughly until you can no longer get the sharp corner of a putty knife under any of the surrounding edges of paint. Then, the bare spot needs to be sanded until the paint edges are smooth. House Painting Arvada CO